Durst Rigid LED Ink
Durst Rigid LED Ink is designed for typical flatbed applications such as printing on paper, plastic hard and soft foam boards, coated metals, acrylics, polycarbonate, rigid pvc and styrene.
This ink set provides good surface resistance, low tack and excellent adhesion.
Available Colors
Printer Platform
- P5 350 / 210 / HS
- Automat
Benefits
- Good stackability
- Wide color gamut
- Very good adhesion
- Low odor
Substrate Application Example
- Plastic hard foam board (e.g. Forex)
- Soft foam board (e.g. Kapa)
- Acrylic / polycarbonate
- Styrene
- Coated metal (e.g. Dibond, Alcan, ...)
Additional Information
Rigid LED has been deigned for rigid applications mainly. Durst does not recommend this ink for flexible application.
Disclaimer: Any written information, spoken technical advice and correspondence represents the currently available product information to Durst, this also applies to information supplied from tests and samples. All technical information and advices do not constitute a guarantee or warranty for specific product properties or its suitability for specific applications. The testing and guarantee to achieve a certain product performance are the responsibilities of the manufacturer of these products, Durst accepts no liability and provides no guarantee in this respect.
We therefore recommend that every print manufacturer thoroughly tests the production process and the final products before full production starts.
Weathering Fastness: All ink sets pass an internal weathering test. However, the testing and guarantee to achieve a certain weathering resistance are the responsibilities of the manufacturer of these products, Durst accepts no liability and provides no guarantee in this respect. We therefore recommend that every print manufacturer thoroughly tests the production process and the final products by means of accelerated ageing tests before full production starts.